標準: ASTM B-62，ASTM B-271，ASTM B-505，ASTM B-584，ASTM B-145/4A，SAE 461，SAE J462，SAE 40，AMS 4085, AMS 4855B，DIN 2.1096.01

C86300連續鑄造錳青銅是一種高強度，不可熱處理的銅合金，用于需要優異的磨損特性和高軸承強度的重載和低速的應用。典型應用包括低速重載軸承，齒輪，凸輪和液壓缸零件。符合連續鑄造規范ASTM b505。

C86300錳青銅的典型用途-CDA 863 - SAE 430 B:

建筑商硬件:支架

電氣:電氣元件，開關

緊固件:擰緊螺母，擰緊螺母

工業:木漿工業成型模具磨損環，大型閥桿，液壓缸零件，螺旋槳，橋銷，木漿工業成型模具，凸輪，Gib，齒輪，液壓缸零件，低速、重載軸承、襯套、高強度機器零件、吊鉤、框架、支柱

海軍陸戰隊:船用五金，舵，船用五金蓋，夾具，船零件，

嘉興固潤是生產制造C86300錳青銅鑄件及機加工部件的主要廠家。

Alloy SAE 430 B，也稱為C86300錳青銅，其化學成分如下：

1. 銅 (Cu)：60.0% - 66.0%

2. 鋁 (Al)：5.0% - 7.5%

3. 鐵 (Fe)：2.0% - 4.0%

4. 鉛 (Pb)：最大0.2%

5. 錳 (Mn)：2.5% - 5.0%

6. 鎳 (Ni)：最大0.5%

7. 錫 (Sn)：最大0.2%

8. 鋅 (Zn)：22.0% - 28.0%

Standards: ASTM B-62, ASTM B-271, ASTM B-505, ASTM B-584, ASTM B-145/4A, SAE 461, SAE J462, SAE 40, AMS 4085, AMS 4855B, DIN 2.1096.01

C86300 continuous cast manganese bronze is a high strength, non-heat treatable copper alloy intended for use in applications requiring a good combination of outstanding wear characteristics and high bearing strength for heavy loads and slow speeds. Typical applications include slow speed heavy duty load bearings, gears, cams and hydraulic cylinder parts. Conforms to continuous cast specification ASTM B505.

Typical Uses for C86300 Manganese Bronze - CDA 863 - SAE 430 B:

BUILDERS HARDWARE: Brackets

ELECTRICAL: Electrical Components, Switches

FASTENERS: Screw Down Nuts, Screw Down Nuts

INDUSTRIAL: Wear Rings for Forming Dies for Wood Pulp Industry, Large Valve Stems, Hydraulic Cylinder Parts, Propellers, Bridge Pins, Forming Dies for Wood Pulp Industry, Cams, Gib, Gears, Hydraulic Cylinder Parts, Slow Speed, Heavy Load Bearings, Bushings, High Strength Machine Parts, Hooks, Frames, Struts

MARINE: Marine Hardware, Rudders, Covers for Marine Hardware, Clamps, Boat Parts

Jiaxing IGRN Solid Lubricating Bearing CoLTD is the main manufacturer of C86300 manganese bronze castings and machined parts.